Replaces: OMC 987811, 988012, 3854190, Sierra 18-5920 & Volvo 3854190-0...

Meets USCG (A-16) 2 nm visibility requirement for powerboats up to 65\' (20 meters). Black housing.12V/5 Watt....

USCG (A-16) certified for 1 nautical mile visibility for powerboats up to 39\' (12m). Rigid polycarbonate construction housing. 12V, 5 watt bulb included....

Series 20 angled light base....

Meets USCG (A-16) requirements for power & sailboats up to 39\' (12 m). 2 nautical mile visibility for masthead lights. 12V/10 watt. All housing parts are non-magnetic polycarbonate....

Meets USCG (A-16) 2 nautical mile visibility requirements for power & sailboats up to 39\' (12m). 12V, 5 watt bulb included. 12V, 5 watt bulb included. 12V/10 watt. All housing parts are non-magnetic polycarbonate. 10 W Festoon bulb included. Size: 2.5\" x 2.9\"...

USCG (A16) certified for 3 nautical mile visibility forvessels up to 65\' (20 m).Non-magnetic and saltwater resistant. Bulb included. Fasteners not included. 3.6\" W x 3.2\" D x 4.1\" H....

Meets USCG (A-16) 2 nautical mile visibility requirements for vessels up to 65 ft. (20m)Non-magnetic and saltwater resistant. Bulb included. Fasteners not included. 3.6\" W x 3.2\" D x 4.1\" H....

Bulbs for Navigation Lights...

For cleaning boats, general use as a shower pump. Threaded male inlet and outlet for standard garden hose attachment. Heavy duty motor....

Supports anchors up to 20 lbs. with 1/4\" to 1/2\" dia. line. Controls anchor from any position. Zinc-plated steel....

For 3\" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2\". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed....

All-welded 304 stainless steel construction with polished finish. Adapts to 3\" or 4\" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16\" L x 4-3/8\" H x 3/4\" D....

A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3\" systems. Sized for installation even on highly contoured decks. 17-9/16\" L x 2-3/4\" H x 11/16\" D....

Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3\" I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8\" L x 3-7/16\" H x 3/4\" D....

These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Installs easily and permanently. Made of flame-retardant black plastic with black vent head/cover....

Meets ABYC Standards. Helps avoid fuel spills because the surge helps automatic fuel nozzles shut off as the tank fills. Glass-filled polypropylene construction and surge-ball design. Withstands oil, gas, and alcohol-blended fuels. Compact size allows installation inside gunwale in any orientation within 45° of vertical. Includes two hose clamps....

Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included....

Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as...

Handy, compact and made from high-impact engineering grade plastic. Contains hand-held shower spray head, 6\' hose, hot and cold water controls all in one unit with hinged cover for protection from elements. Can be used to rinse off salt or fresh water after swimming. Measures 9-1/2\" long, 5\" wide and 2-1/4\" deep. Installation hole size is 8-1/2...

This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline \"D\" batteries. Lifts water up to 40\" and includes a 42\" hose with garden hose adapter. Not for use as a permanent bilge pump....

This sump box features an air vent to prevent air locks, slotted mounts for easy installation & removal, a straight mesh filter to provide easy removal for cleaning and pre-installed inlet fittings instead of a shared manifold so additional fittings can easily be added if needed. A reliable Attwood Sahara pump automatically pumps the box dry. G...

Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty....

For use on boats up to 39.4\' (12m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 9-watt wedge base lamp and 7\" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights ar...

For use on boats up to 39.4\' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 9-watt wedge base lamp and 7\" wire leads. Install with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Visible 225°.Size: 2-3/8\" dia. x 1-7/16\" vertical height....

360° visibility, for boats up to 39.4\' (12 meters) in length. Provides 360° illumination. Aluminum pole. Includes 8-watt wedge-base lamp. Locking collar fits existing bases as well as LightArmor.2-pin standard pole: fits base 911370, 911445, 911443, 911339, 911490...

Two-mile, 360° visibility, for boats up to 39.4\' (12 meter) in length. The articulating light simplifies installation. The 2-pin locking-collar pole allows installation in 95% of existing bases (Attwood & competitors). Articulating head adjusts 15° fore or aft to fit all base angles. 9-watt wedge-base lamp. Anti-glare lens focus at the horiz...

Two-mile, 360° visibility for boats up to 39.4\' (12m). Since all-round lights must be at least 39-3/8\" (1 m) above sidelights, some boats require a long light pole. A removable 2-pin locking-collar pole folds in half for easy stowage. 9-watt wedge-base lamp. Anti-glare lens....

Stainless steel with plastic body and watertight lamp socket. Provide 2-mile visibility for craft up to 164\' in length. 7.5 watt lamp and two stainless steel #10 screws included. Model 6356 has a translucent back so it can also be used to light an interior compartment. Uses #90 replacement bulb....

316 Stainless Steel. Replacement cap attached with stainless steel beaded chain. 2 year warranty....

Stainless steel. Provides 1-mile visibility for boats up to 39.4\' in length. Includes 7.5-watt lamp. Installs with (3) #6 fasteners (not included). Combination light: 225° visibility.Size: 2-1/2\" L x 2-1/4\" W x 1-1/2\" H....

Stainless steel. Provide 1-mile visibility for boats up to 39.4\' in length. Includes 7.5-watt lamp. Installs with (3) #6 fasteners (not included). 112.5° Visibility.Size: 2-1/2\"L x 2-1/4\"W x 1-1/2\"H....

This cleat recesses flush to the deck for a clean, contemporary look. Two mounting styles include an exclusive stud-mounted cleat (Patented). Water-resistant cleat recesses into cast body, and is captured with lubricated seals. Durable, enhanced cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy...

A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8\" stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate si...

2-mile, 360° visibility, for boats up to 39.4\' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3\" below deck. Includes 9-watt wedge-base lamp. Has three countersunk holes for #10 fasteners....

Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Without chain....

Woven polypropylene with \"firm-grip\" buckles are completely resistant to battery acid. Kit includes four #8, 3/4\" screws and two footman clamps....

Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade....

A simple-to-install battery tray that fits into a limited space. For batteries up to 10-1/2\" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws....

Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2\" wire leads for connection to 12 VDC power supply. Dimensions: 4\" x 1-3/8\" dia. installation hole. Can also be used with locking-collar series when locking collar is removed....

Nylon. For traditional Attwood pole lights. Hinged cover snaps closed to keep dirt and water out when light is stowed. Four countersunk holes for installation. Includes 7-1/2\" hard wire leads for connection to 12 VDC power supply. Dimensions: 2-1/4\"L x 1-3/4\"W. 1-1/4\" diameter installation hole.Base fits the following poles: Frosted globe 5100 ...

Fits most popular oar sizes. Bright zinc-plated steel resists rust. No drilling necessary. Fastens securely to oar with one adjustable bolt....

Gives outboards and stern drives a performance boost, improving both stability and handling. The Hydro-Stabilizer outperforms ordinary flat hydrofoils by reducing drag when the hull goes on plane. Installs on a large variety of motor styles and sizes with included stainless steel bolts and lock nuts. Wings constructed of black molded plastic. The H...

Solid ACME threaded rod, adjustable under load. Unthreaded bottom for safety. Durable steel handle....

For use with Bearing Buddy on trailers with brakes or as replacement seals. Lets seal ride on permanently smooth, corrosion-proof surface constantly greased by action of Bearing Buddy. Seals will last much longer....

Ideal for storing boat hooks, mops, gaffs, flashlights, tools and a variety of accessories. All use 1/8\" holes on 3/4\" centers....

Made of marine plastic. Holds boat hooks, bilge pumps, oars, flashlights, and chart tubes. Stainless steel screws included....

White cycolac plastic with white acrylic cap to prevent cracking or discoloring....

A screw-type with self-cleaning thread design. Ideal installation for transom of small boats, fish wells, coolers, ice chest, water tanks, etc. Part should be mounted in 1\" ID hole with two stainless steel fasteners with gap in thread at lowest point. 1\". Black. Includes gasket....

Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. A self-aligning center and an innovative gasket assures a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed....

Watertight, overlapping cover conceals fasteners for a clean, modern look. Three separate sealing rings assure a watertight closure. Twist threads are non-jamming, self-cleaning, and lift the center for easy removal. High impact, marine quality plastic with UV inhibitors. Designed for Non-traffic areas: bulkheads, cockpit walls, and cabin sides....

Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed...

An extra heavy \"O\" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners....

...

Install almost anywhere. There are molded in stand-offs on the bottom of holders to help prevent condensation build-up and keep containers from sticking to the bottom, and four generous holes that allow for drainage at different angles....

Safety-Soft, flexible P.V.C. Designed for winch handles, top action, standard or ratchet...

Safety-soft flexible material prevents injuries....

Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All s...

Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal....

Bennett hydraulic actuators are built to last. All models provide a 2.5\" stroke. Replacement actuators do not include hardware. Hardware kit H1170A is recommended when replacing a hydraulic actuator assembly....