...

Utilizes hi-tech materials and state of the art engineering to bring the ultimate in performance, value and style. All weather grips for easier handling in cold, wet, or high temperatures. Weatherproof lock cylinder for trouble free use. Strong, reversible automotive style key is easy to insert and remove. Fits comfortably on your key ring. Double ...

CAVINESS® Power Grip, lightweight, economical, and even distribution of flex load are the reasons that these oars have set the American standard. A wedge insert in the end of the blade virtually eliminates blade splitting for long life. Standard features: Wedge Insert, Red Caviness® Power Grip, and Tri-Coat Finish. Approximate blade dimensions: 5...

...

Sealed Single 6\" oval polycarbonate housing/lens with rubber grommet and standard 3 pin pigtail.Kit includes light, grommet and straight pigtail....

Light, medium or heavy grit cleaning pad attached to a sturdy molded block. Threaded hole for threaded handles....

Designed to operate anywhere, 24 hours a day. Say goodbye to mold, mildew, and moisture. Place Air-Dryr™ on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. Neutral beige color housing made of polycarbonate....

Made of highest quality polycarbonates with stainless steel hardware....

For deck or side mounting. Quick action handle makes operation easy. Bolt holes: 5/16\" dia., 3\" x 1-1/2\" on center. Not for use with antenna longer than 8\' in self-supporting mode....

RG-62/93 ohm cable. Includes Motorola female and male connectors installed....

4 Hole pattern. Height is 1-1/8\"....

4-Hole pattern. Rotates 360°...

...

...

Standard seat mount, black. Steel. Perfect for car toppers, duck boats or any portable boat....

Below deck mount, requires a 3-1/2\" hole in deck....

Includes a Trac-Lock™ swivel that rotates 360 and a Brite-Dip finish 13\" post. Use with Taper-Lock™ base sold separately....

No more spinning seats! Locks the cylinder in place for improved stability. 360° swivel. Use with Taper-Lock™ base. Seat mount is die cast aluminum with black E-coat finish....

Rotates to 360° with a 3° lean back angle for optimum comfort. E-Coated units are coated to increase rust resistance....

...

Aluminum 1-3/4\" diameter anodized finish posts and reinforcement ring with 3/4\" diameter pin of plated steel. Pin extends 2-1/2\" below deck.Posts with threaded pins have E-coated threads....

High strength aluminum. 9\" Round. Works with a locking latch that extends from the pedestal post. Push lever activated pedestal for easy removal of post from base. Superior strength. Use with any Spring-Lock™ or Clip-Lock post....

Black E-coat for corrosion protection. Use with any Spring-Lock™ or Clip-Lock post....

Spring-Lock™ works with a locking latch that extends from the pedestal post. When the push button activator is depressed, the latch unlocks to allow removal of the post from the base. All parts interchangeable with Spring-Lock™ or Click-Lock swivels and bases....

Locking Spring-Lock™ powder coated seat mount.Works with 1680411 & 1680415 posts....

2-3/8\" Threaded table base. High-strength aluminum. 7\" diameter with 5-3/4\" hole pattern. Works with any 2-3/8\" Thread-Lock™ table post (sold separately). 5 year warranty....

Adds strength to boat\'s transom by evenly distributing forces during fast starts, high speed runs and sharp turns. Quality cast in Almag 35 aluminum for non-corrosive strength. Black. 12\" bolt pattern....

...

Grill with Thread-Lock™ 29\" post and Thread-Lock™ base....

High strength composite bushings....

...

...

Keeps water and dirt out of wheel bearings and keeps them properly lubricated. The Bearing Buddy® automatic pressure relief feature allows excess grease to escape if the hub is overfilled. Includes The Bearing Buddy® Bra, a vinyl cover that fits over the Bearing Buddy® to contain excess grease and keep it off tires and wheels....

Mounts on clean, flat surfaces using an industrial strength adhesive....

Oval, 10-diode LED stop, turn and tail light designed for horizontal installation. Meets DOT requirements. Operates from 9-16 volts. Hard-wired design eliminates the need for separate plug and grommet. Surface mounting for quick and versatile installation. Includes decorative snap-on bezel that adds the elegance of chrome while hiding fasteners....

Tester plugs into connector of tow vehicle and illuminates when the electrical connections are correct. Tests to SAE standards on flat 4-way functions for tail light, stop/turn lights, and ground....

Micro size allows these fog lights to mount anywhere; on a deck, on top of or hanging from a wakeboard tower, etc. Slim size and low mounting profile compliments any installation. Metal housing. Kit includes two 55 watt lights, wiring, rocker switch, and easy to follow instructions....

Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug (#14249) to complete installation....

May be used as combination side marker and clearance light for over-80\" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plug to complete installation. Features a 15,000-hour long-life bulb....

High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflectivity, wider viewing angles, higher visibility at long range and tougher durability than conventional conspicuity reflectors....

Fits old style 114A/R, 115A/R, 440/L & 441/L....

...

...

These dual port pumps offer the convenience of a single intake for both livewell and raw water washdown operation. Connects directly to a seacock and the upper outlet connects to a 3/4\" livewell hose and the lower outlet connects to a washdown pump through a 1/2\" or 3/4\" port. High pressure inlet seal handles higher pressures. Duraport discharge...

Radial flow design. Produces a substantial output at relatively low RPM\'s. Low noise level make excellent for use in heads & galleys. Massive 3\" diameter motor idles at 3100 RPM\'s assuring long life. Housings are molded of tough glass filled composite resin.Flange Mount # 54124 - Conventional design outlet flange to mount directly to the exh...

Heavy duty chrome plated cast brass basin tap. Has a 1/2\" NPT straight male thread. 7/8\" Mounting hole....

...

This chrome plated brass unit is our most popular galley mixer design with a swivel spout. 1/4\" turn valves, flexible supply lines and 1/2\" NPS female connection. 1\" Mounting hole....

...

Specifically designed for the marine environment, the Uflex AV and AVL hatch lifters feature anodized aluminum and stainless steel construction. They can lift up to 265 lbs. in single actuator applications (530 lbs in dual installations).The AV series has a unique feature that allows the hatch to be lifted in the event of a power failure such as a ...

Use to fill and bleed a hydraulic helm....

...

Side mount control features a stainless lever and flange with adjustable brake tension release and detents. Flush side mt. installation is particularly suitable for throttle control or hydraulic shift operation. For use with Uflex C2, C8 and MACHZero engine control cables....

Two lever/ single action for shift OR throttle....

...

Single lever/dual action for shift and throttle....

Featuring an 18 laywire conduit for enhanced efficiency, durability and longevity the C14 cables have stainless end fittings....

Universal 33C style control cable with brass and stainless steel 10/32 threaded end fittings. Featuring an 18 laywire conduit for enhanced efficiency, durability and longevity the C2 cables have brass end fittings. They are suitable for use on Yamaha®, Suzuki®, Honda®, Volvo®, and many other engines and applications....

Bulkhead mount 4300 type cable. Stainless steel fittings. Recommended for heavy duty applications. Stroke: 3.1\"...

Heavy duty 18 laywire conduit for long life & high efficiency. For Mercury® and Mercruiser® engines and Mercury® Generation II™ series controls. Stroke: 3.3\" (85 mm)....